While we’re all waiting for the carriers and the organizations to agree or not on the recommendations of the Presidential Emergency Board, I thought I’d probe a bit more into the issue of the single person crew for main track freight train movements in these United States.
The organizations representing train and engine crews claim that single person crew freight train operations are intrinsically unsafe, and that the vulnerabilities cannot be remediated, mitigated, or corrected. .
The carriers argue that there is no evidence that multi-person crews are more safe than single-person crew consists; that single person operation of locomotives has long been the standard in passenger service and that form of operation refutes the claim of inherently compromised safety; that other countries have utilized single person freight crews without compromising safety; and that the crew consist size is a matter for collective bargaining, free markets, and not government regulation.
FRA for its part presents an argument of intangibles, asserting that multi-person crews demonstrate a “teamwork” approach to task division, problem solving, and safe operation that, even if it hasn’t been measured, provides a real advantage to preserving safe train operations, and that studies of single person freight train operations in other countries, particularly those of Europe, are irrelevant because the operating environment in the good ol’ US of A is so different, so unique, so exceptional.
So the organizations are generally happy with FRA’s NPRM.
The carriers are generally unhappy.
FRA itself is….well, who knows?
Word to all those happy: Single person main track freight operations are here are coming and will grow. All that is recognized in the NPRM.
Word to all those unhappy: Single person main track freight operations are here are coming and will grow. All that is recognized in the NPRM.
Word to all those happy, unhappy, or somewhere in-between: Single person main track freight operations are here are coming will grow and all that is recognized in the NPRM.
FRA had to issue an NPRM, compelled in part by the organizations’ ability to persuade state legislatures to fill the vacuum arising from FRA’s previous lack of action. Pre-emption is fundamental to the efficiency of interstate commerce, new and old federalists to the contrary notwithstanding.
To those really unhappy, FRA could not leave the industry to “self-regulate” in this critical matter, not after the FAA-737Max debacle, thank you Boeing. Regulatory suicide is not part of FRA’s brief, nor should it be.
So what does the NPRM do? It mandates a two-person crew minimum for train operations with exceptions and qualifications. The mandate allows single person train crew staffing for operation of:
Ok, that’s a tiny amount of the approximately 70-75 thousand (my estimate) freight trains operating monthly over the general railway system, but it’s a start.
Are single person crew freight train operations safe? That’s not exactly the question to be investigated given that safety is the result of multiple inputs to train movements.
Can single person crew consist freight train operations function as safely as current train operations in the US? Closer as that may be to the question that needs interrogation, it’s just not quite the right question. It’s still a bit off the mark.
We, we enlightened modern, responsible, fair-minded, committed railroad operating officers know we have to answer a different, and critical question: “Can single person crew consist freight train operations be organized, structured, to function more safely than the level currently achieved by multi-person crew operations.”
Why would I make that our goal; why would I so explicitly raise the bar above FRA’s usual minimal standard?
It may just be that we in the US are at the limit of improvements that are (mostly)technology dependent, and it may just be that in examining single person freight train operations where such operations are the default mode, to determine what changes were made, where such operations differ in the details from those in the US, we can establish procedures, practices, systems that improve the safety of all train operations.The devil’s in the details, but so are the angels of our better nature.
Back in 2016, AAR commissioned the Oliver Wyman consulting firm to study the safety of single person crew operations on European Railways. In part, the study was undertaken to refute FRA’s (then) claim that European train operations were so different from those in the US that there was no practical value in using the European experience to assess the potential safety, or lack, of single person crew operation on US railways.Now, not to mince words, that’s a stupid claim for FRA, or anyone, to make. It’s the same rail gage in Europe; there are the same principles essential to safe train separation; it’s the same damn physics.
The Oliver Wyman report, “Assessment of European Railways: Characteristics and Crew-Related Safety” attacks FRA’s notion from the getgo: The [European] rail network is as large as or larger in terms route-kilometers than that of the United States, and has a train density (daily trains operated per route-kilometer) approximately twice that of the United States. "The European network also has a greater percentage of passenger trains, which are intermixed with and operate at higher speeds than freight trains, and multiple freight and passenger operators sharing infrastructure, making for a more operationally complex network. Freight traffic in Europe also has a level of diversity similar to that of freight traffic in the United States, including mix of commodities dangerous and non-dangerous goods and mix of train types…”
The Wyman reports goes on to compare single person crew operating safety with that established by multi-person crews and there is no overall degradation that can be related to reduced crew size.
Now FRA gets it wrong. It’s the same damn physics and the same earthly human beings.
But it is not solely the convergence of these “macro” indicators that makes the European experience with single person crew freight train operations so relevant to the challenge of single person crew operations in the US. Rather, the relevance, the learning opportunity is the divergence, in the differences, in the distinctions of “micro” factors between US and European railways. The ensemble of micro factors is critical in maintaining the safety of single-person crew operations.
One such micro factor is train length and weight. Single person crew operations account for between 25 percent and 4 percent of train-kilometers operated in Germany, the UK, France, Italy, Poland. The average trailing tonnage for freight trains in these countries ranges from the low of 408 metric tonnes to a high of 640 metric tonnes, about what? 10 percent of the US average? However, the lighter loads reduce the need for extended stopping distance, allowing the freight to move at higher speeds. This mitigates the problem of passenger train overtakes, and “parking” the freight to avoid cascading delay through the system.
If I was seriously pursuing single person crew freight operation, I’d want to reduce the required stopping distance of my single person trains by restricting train length and weight, and I would give serious consideration to requiring all cars in the consist be equipped with operable ECP braking. Then I could operate my single person consist freight at a higher speed, and operating a train at the proper maximum speed is a plus for system safety.This also reduces employee time on duty and risk of fatigue.
Speaking of fatigue, twenty years before the Oliver Wyman report, Beauchemin-Beaton-Lapointe, Inc. Consulting Engineers, performed a “Study of One-Person Train Operations” for the Transport Development Centre ofTransport Canada. This study, dated as it might be, reviewed single person crew main track operations on Sweden’s Ore Line, UK’s Freight Liner Ltd, Denmark’s Danish State Railway, Tranzrail of New Zealand, Sweden’s State Railway, UK’s English Welsh and Scottish Railway, and Deutsche Bahn.
Back then, all the railways operated freight trains with single crew members. Our British cousins restricted single person crews when trains transporting hazardous materials, wagons (cars) lacking appropriate braking, “and over lines adjacent to non-circuited passenger tracks, unless the communication system permits either direct speech radio communication between the [single-person] driver and the controller of the controlling signal box.”
What did these railroads share, besides the positive safety performance of single person main track freight operations? Schedule and by that I mean establishing the employees’ schedules of operation well in advance and maintaining those schedules. To quote the study:
On most railways the drivers work in shifts ranging from 7 to 10 hours. Total number of hours worked per week range from 35 to as many as 50. The drivers are generally allowed a minimum of 10-12 hours between shifts. Most railways allow a 30-minute break after 3.5 to 5 hour[s] run. The break is taken at the driver’s discretion and the railways generally do not object if the break is not taken.Most drivers are aware of their work schedules considerably in advance. For example, on Tranzrail, the driver schedule is known as much as eight weeks in advance.
Sweden’s Ore line operated train consists of 5200 tonnes, app 100 tonnes per car. Drivers’ schedules are known as much as six months in advance.
UK’s Freight Liner limited hours of service on any day to 11 hours including a 1 hour break that was mandatory after 5 hours continuous run.
Denmark adds electro-pneumatic brake operation to single person crew freight trains, limits the run to a maximum 7 hours a day, and 35 hours a week. “Sixty percent of the drivers know their schedules as much as six months in advance. The others may not know their schedules more than 5 days ahead.”
On the English Welsh and Scottish Railway, along with very rigorous limits to time on duty, “the drivers work on an 8 week schedule cycle and usually know their schedules a minimum of 8 weeks in advance.” And, if that isn’t enough to make you apply for dual citizenship, “the driver’s shift is always symmetrically arranged, i.e the place where the shift starts is the place where the shift ends.” No away-from-home-terminals for them.
Deutsche Bahn limits the maximum throttle time on a single run for a single locomotive engineer/driver to four hours. When a run will exceed four hours, two drivers share the duty.
It’s clear, at least to me, that there are commonalities to these implementations to single person freight train operation. Those commonalities are:
Now to be sure, we in the US have the ability to incorporate these modifications into our systems. After all, FRA is wrong, the experience of European rail operations does have significance in these matters.
And we’ve even, informally, utilized some of these tools, like “swapping road crews” mid-run to get all and their trains tucked in safely in their proper home terminals. Informality is not enough.
More than anything, if we adapt these measures to our operating environment, stabilizing crew duty times and preventing shift variations when individual changes ripple through the system, we just might crack the invisible wall holding up progress in overall operating safety.
However, I suspect these measures might take the patina off the golden ring of reduced crew costs that every manager grabs at as if it were a life preserver, and might be the only thing a hedge fund can see. And this might require restrictions on seniority when runs are abolished, added, or up for bid—for example restricting a change of shift for an employee involved in single person operations when his/her run is abolished, or he/she gets bumped. A shift change may have to be restricted to yard service as a transition step to shift change in a main track operation.
So there, I’ve made management and the investors unhappy.
And I’ve made the organizations unhappy.
And FRA? Who knows? My work here is done.
David Schanoes
September 5, 2022
Copyright 2012 Ten90 Solutions LLC. All rights reserved.